Changzhou Hywell Machinery Co,.Ltd
Model No.: LPG
Coffee-mate Dryer Machine: Coffee-mate Drying Machine
Packaging: Wood Case
Productivity: 10-20 Set per Year
Place of Origin: China (Mainland)
Supply Ability: 5 Set/Sets per Month
HS Code: 8419399090
New Design Coffee-mate Drying Machine
New Design Coffee-mate Drying Machine Brief Introduction:
Coffee-mate Dryer Machine is a wide applied process in liquid process shaping and drying industry. This kind of Coffee-mate Drying Equipment has quick drying speed. Particularly the Coffee-mate Drying Machinery is suitable for producing powder, granule or block solid product from solution, emulsion, suspending liquid and pumped paste liquid. Therefore when the distribution of granule size, final moisture, bulk density, granule shape of finished product must be conformed to accuracy standard.
The surface area of material liquid through atomizing is increased greatly. In hot air stream, 95% to 98% of moisture can be evaporated at the moment. Especially suit for drying thermal sensitive material. The product made by the machine has good uniformity, fluidity, solubility, high pure, and high quality.
Air filtering system and heating system
Before the fresh air enter into the heater, it should pass through the Pre&post filter first, and then enter the heater for heating. For the heating method, there are electrical heater or steam radiator, gas furnace and so on. Which method to choose depends on the customer site conditions. To ensure the drying medium enter into the drying chamber with high purity, the heated air should go through the high temperature high efficiency filter (HEPA-Optional) before enters the drying chamber.
3. Atomizing system
The atomizing system consists of high speed centrifugal atomizer with inverter and so on.
The powder from the high speed centrifugal atomizer is between 40-120 microns.
4. Drying tower system
The drying chamber consists of the spiral shell, hot air distributor, main tower and relevant fittings.
The Spiral shell and hot air distributor: the spiral shell and hot air distributor at the air inlet of the tower top can regulate air flow rotation angle according to the specific condition, guide the air flow inside the tower effectively and avoid the material stick on the wall.in the middle there is the position for installing the atomizer.
Drying tower: The inner wall is SUS mirror sheet, ad welded by the arc welding. The insulation is rock wool.
The tower is manhole and view port as to convenient to clean and maintain the tower. For the Tower body cross interface, pipe elbow are arc butt design, reduce dead angle; sealed type.
The main tower is equipped with air hammer, controlled by the pulse, and hitting the main drying tower timely as to avoid the dust stick on the wall
Main Technical Parameter:
|Spray Drying Equipment||LPG-5||LPG-25||LPG-50||LPG-100||LPG-150||LPG(200-11000)|
|Inlet temp(ºC)|| ≤350 ||≤350||≤350||≤350||≤350||≤350|
|Driving type of centrifugal sparyer||drived by compressedair||machanincal drive|
|Dia.of spray pallet||50||102||108||108||150||180-340|
|Dimension(m)||1.8*0.93*2.2||3*2.7*4.26||3.7*3.2*5.1||4.6*4.2*6||5.5*4.5*7||design acording to actual conditions|
|Powder recollection(%)|| |
Copyright © 2019 Changzhou Hywell Machinery Co,.Ltd All rights reserved.