Changzhou Hywell Machinery Co,.Ltd
Model No.: YPG
Pressure Spray Dryer: Spray Drying Equipmwnt
Spray Drying Machine: Instant Granule Drying Machine
Packaging: Wood Box
Productivity: 10-20 Set per Year
Place of Origin: China
Supply Ability: 3-5 Set/Sets per Month
Pressure Spray Drying Equipment
1. Pressure Spray Drying Equipment is Rich Fat Milk Powder Dryer
2. Pressure Spray Drying Equipment is Cocoa Milk Powder Dryer
3. Pressure Spray Drying Equipment is Milk Powder Spray Dryer
1. Pressure Spray Drying Equipment Principle:
The solution, emulsion, suspension liquid or slurry are sprayed into fine beads in the hot air, going down from the top of the drying chamber to the bottom, the water will be evaporated to and the product becomes small granular product. Induce hot air from the top of drying tower, at the same time, pump the material liquid to the top of the tower by high pressure pump, the feeding solution becomes fine beads or small droplets through the pressure nozzle(s). When the droplets meet the high temperature hot air, the water will be evaporated immediately, and the material liquid is dried into dry product in a very short time, the product is discharged from the bottom of the drying tower, or from the cyclone (depend on the configuration). When the hot air contacts with the droplets, the temperature declines significantly, and the humidity increases greatly, and then will be exhausted by exhaust fan. The fine powder in the air will be collected through different separating devices There`re different fine powder separation and recovery devices, such as cyclone (the common type and various combination type), bag filter, cyclone + bag filter, cyclone + wet scrubber, and bag filter + wet scrubber etc. We should different fine powder separation and recovery devices as per the characteristics of product and requirements of customer. Depend on the product features and requirements, we might install secondary drying and cooling system (such as ZLG vibration fluid bed or pneumatic transportation), formulation system or powder sieving system etc after the spray dryer, or dehumidifier. The particle size of the product from Pressure Spray Dryer is normally within the range of 120mesh to 20 mesh. If bigger particles are required, we suggest FL Fluidized Granulator or re-combined agglomerator.
2. Pressure Spray Drying Equipment Feature:
The dry speed is fast and suitable for drying thermal sensitivity material particularly.
The finished product is ball granule with uniform size. Its fluidity and solubility are good. The purity of product is high and its quality is good.
It applied scope is wide. According to the characteristics of raw material, it can use hot air to dry and can also use cool air to granulate. It has strong adaptability to raw materials.
Its operation is simple and stable and its control is simple and convenient and is easy to realize automatic operation.
3. Pressure Spray Drying Equipment Application:
It is suitable for liquid of foodstuff, pharmaceutical, chemical industry, dyestuff, ceramics, agrochemicals, plastic and so on
|Pressure(Mpa)||it can be regulated from 0.6to5 in general, it will be from 1to 3|
|Heating way||electricity||electricity+steam||electricity+coal fuel(oil)Hot Air Furnace|
|Diameter of tower body(mm)||1300||1800||2400||2600||2800||3200||3800|
|Total height of equipment(mm)||7800||9200||11600||14000||15300||17100||19000|
Copyright © 2019 Changzhou Hywell Machinery Co,.Ltd All rights reserved.